What is Cert-Manager
Cert-manager is an open-source certificate management controller for Kubernetes. It is used to acquire and manage certificates from different external sources such as Let’s Encrypt, Venafi, and HashiCorp Vault. Additionally, cert-manager can also create and manage certificates using in-cluster issuers such as CA or SelfSigned. See the full list of all cert-manager issuers to see what is supported.
Once cert-manager is installed and configured to your Kubernetes cluster, you can request certificates from it. Cert-manager ensures that certificates are existing and valid. Meaning it renews SSL certificates for you.
Sample Scenario: Transport Encryption for a REST API
For demonstration purposes, we will go through the process of providing proper transport-level encryption for an existing REST API. The API consists of two public endpoints. Additionally, the API exposes fundamental documentation via Swagger as shown in figure 1.
From an architectural perspective, the demo application is fairly easy. The previously shown API runs in a Kubernetes cluster. NGINX Ingress exposes it to the internet. Additionally, a custom domain name ensures, users can access the API using a valid domain name. As shown in figure 2, this sample was built on top of Microsoft Azure, leveraging popular services like Azure Kubernetes Service (AKS) and Azure DNS. However, Microsoft Azure is not required at this point. Everything mentioned and explained in this article is cloud-agnostic. It does not matter where you run your containerized workloads. It is up to you (or your IT department).
Azure DNS routes requests to the public IP address associated with the service created by NGINX Ingress (Ingress) inside AKS. Based on a custom
Ingress manifest, cert-manager acquires an SSL certificate from Let’s Encrypt. Again, Ingress takes the SSL certificate and attaches it to the response.
Install Cert-Manager on Kubernetes
You can install cert-manager either by installing required Kubernetes artifacts using
kubectl as described in the official cert-manager documentation or you use the Kubernetes package manager Helm to get everything up and running in seconds.
If you haven’t used Helm before, consult the official Helm 3 documentation for detailed installation instructions. Helm can install packages from different sources (those sources are referred to as repositories). Once Helm 3 is installed on your local system, you can use the CLI to add the official cert-manager repository and install cert-manager on Kubernetes. To ensure proper in-cluster isolation, you should consider installing cert-manager into a dedicated Kubernetes namespace, as shown in the following code snippet:
# Create a dedicated Kubernetes namespace for cert-manager kubectl create namespace cert-manager # Add official cert-manager repository to helm CLI helm repo add jetstack https://charts.jetstack.io # Update Helm repository cache (think of apt update) helm repo update # Install cert-manager on Kubernetes ## cert-manager relies on several Custom Resource Definitions (CRDs) ## Helm can install CRDs in Kubernetes (version >= 1.15) starting with Helm version 3.2 helm install certmgr jetstack/cert-manager \ --set installCRDs=true \ --version v1.0.4 \ --namespace cert-manager
Cert-Manager Building Blocks
Cert-manager unifies the certificate acquisition process across different certificate authorities, as mentioned earlier in the article. To achieve this, cert-manager uses a small set of building blocks to acquire SSL certificates and integrate them with existing ingress deployments like NGINX Ingress.
The (Cluster) Issuer
Issuer is responsible for issuing certificates. It is the signing authority and based on its configuration. The issuer knows how certificate requests are handled. You can create either namespaced or cluster-wide issuers. Namespaced issuers are created using the
Issuer specification. In contrast, you create a cluster-wide issuer by using the
Certificate resource is a readable representation of a certificate request.
Certificate resources are linked to an
Issuer (or a
ClusterIssuer) who is responsible for requesting and renewing the certificate.
Cert-manager creates several objects using different specifications such as
Challenges while requesting certificates. It is important to understand how those objects play together. Especially when troubleshooting issues. Fortunately, there is great documentation on general troubleshooting and troubleshooting in the context of ACME certificates.
Request Let's Encrypt SSL Certificate Using Staging API
First, create the
Issuer. This sample uses a namespaced issuer. Let’s encrypt offers a staging API that you should use during initial configuration. Modifying in-cluster resources such as the
Issuer or the
Certificate may lead to hitting API rate limits with Let’s Encrypt. Once the configuration is valid, you should switch from staging to production API using a dedicated
Issuer. You specify the desired API using the
server property of the spec. Provide a valid email as part of the
Issuer resource when interacting with the production API. Let’s Encrypt will use this mail also for notifying you about upcoming certificate expirations.
apiVersion: cert-manager.io/v1 kind: Issuer metadata: name: letsencrypt-staging namespace: mini-api spec: acme: # Staging API server: https://acme-staging-v02.api.letsencrypt.org/directory email: email@example.com privateKeySecretRef: name: account-key-staging solvers: - http01: ingress: class: nginx
Have you noticed the
privateKeySecretRef property? It is a reference to a Kubernetes secret. Again, cert-manager creates and manages the secret for you. It contains private key material for the ACME account. Next is the
Certificate. It is linked to the
Issuer using the
issuerRef, and instructs cert-manager to store the certificate in the
miniapi-staging-certificate secret. Cert-manager automatically creates the secret for you as part of the certificate acquisition.
apiVersion: cert-manager.io/v1 kind: Certificate metadata: name: miniapi-staging namespace: mini-api spec: secretName: miniapi-staging-certificate issuerRef: name: letsencrypt-staging dnsNames: - miniapi.thinktecture-demos.com
Last but not least, update the
Ingress resource. Instruct NGINX ingress to force SSL redirection (see corresponding
Ingress resource has to be linked to the
Issuer too. Because we use a namespaced issuer, the name of the annotation is
cert-manager.io/issuer. For a cluster-wide issuer, use
cert-manager.io/cluster-issuer. Also, configure the reference to the secret (which contains the SSL certificate) in
spec.tls.hosts is valid.
apiVersion: extensions/v1beta1 kind: Ingress metadata: name: ingressrule namespace: mini-api annotations: kubernetes.io/ingress.class: "nginx" nginx.ingress.kubernetes.io/ssl-redirect: "true" nginx.ingress.kubernetes.io/force-ssl-redirect: "true" cert-manager.io/issuer: "letsencrypt-staging" spec: tls: - hosts: - miniapi.thinktecture-demos.com secretName: miniapi-staging-certificate rules: - host: miniapi.thinktecture-demos.com http: paths: - path: / backend: serviceName: miniapi servicePort: 8080
Having everything in place, go ahead, and create the desired Kubernetes namespace. Then, deploy the resources with
kubectl apply. (Instead of referencing every single file, you can also provide the path to the folder that contains a bunch of YAML manifests.) Acquiring the SSL certificate takes some time. Use
kubectl to double-check the process. Consider looking at the
Certificate instance, the underlying
CertificateRequest, and the generated
Order as shown in the following snippet:
# get CertificateRequests kubectl get certificaterequest # see the state of the request kubectl describe certificaterequest some-certificaterequest-name # check the Order kubectl get order kubectl describe order some-order-name # check Challenge kubectl get challenge kubectl describe challenge some-challenge-name
Verify SSL Certificate Metadata
At this point, your exposed service should already use an SSL certificate issued by Let’s Encrypt. However, browsers will flag that certificate as invalid or mark your service as insecure because of SSL certificates issued by the staging API of Let’s Encrypt lack a trusted issuer. Nevertheless, you should take a look at the issued certificate and verify if its properties match your requirements.
If everything looks good, you can move on and switch to the production API of Let’s Encrypt. However, if something needs to be aligned with your requirements, you should have modified the underlying
Certificate resource, which you created earlier. In the following picture, the invalid staging certificate is displayed. You can inspect a certificate in your browser by clicking on the Certificate button from the lock (🔒) menu (which is located next to the address bar):
Query Let's Encrypt Production API to Acquire Valid SSL Certificate
Having all metadata exposed as requested, it is time to move your certificate request from staging API to production API. Although this step is fairly easy, it is mandatory to acquire a valid SSL certificate. Create a new
Issuer which targets Let’s Encrypt production API:
# prod-issuer.yml apiVersion: cert-manager.io/v1 kind: Issuer metadata: # different name name: letsencrypt-prod namespace: mini-api spec: acme: # now pointing to Let's Encrypt production API server: https://acme-v02.api.letsencrypt.org/directory email: firstname.lastname@example.org privateKeySecretRef: # storing key material for the ACME account in dedicated secret name: account-key-prod solvers: - http01: ingress: class: nginx
Having the production issuer in place, create the production
apiVersion: cert-manager.io/v1 kind: Certificate metadata: # different name name: miniapi-prod namespace: mini-api spec: # dedicate secret for the TLS cert secretName: miniapi-production-certificate issuerRef: # referencing the production issuer name: letsencrypt-prod dnsNames: - miniapi.thinktecture-demos.com
Finally, update the
Ingress resource and link it to both: production issuer and production certificate:
apiVersion: extensions/v1beta1 kind: Ingress metadata: name: ingressrule namespace: mini-api annotations: kubernetes.io/ingress.class: "nginx" nginx.ingress.kubernetes.io/ssl-redirect: "true" nginx.ingress.kubernetes.io/force-ssl-redirect: "true" # reference production issuer cert-manager.io/issuer: "letsencrypt-prod" spec: tls: - hosts: - miniapi.thinktecture-demos.com # reference secret for production TLS certificate secretName: miniapi-production-certificate rules: - host: miniapi.thinktecture-demos.com http: paths: - path: / backend: serviceName: miniapi servicePort: 8080
Apply the changes to Kubernetes (
kubectl apply). Again, requesting and issuing the certificate may take a few seconds.
Verify SSL Certificate Validity
At this point, you should receive a valid SSL certificate for your domain from Let’s Encrypt. Fire-up your browser and verify that your SSL certificate is shown as valid and all metadata is provided as expected. Again, click the lock () icon next to the address bar and open the certificate details, as shown in the following picture:
Troubleshooting Let’s Encrypt SSL Certificate Acquisition
Knowing what to do when something goes wrong is essential. Things will go wrong. Although I mentioned both URLs already, bookmark the great guide on troubleshooting in the context of ACME certificates, and the general troubleshooting guide, which also provides a good explanation of the certificate acquisition workflow.
Having Let’s Encrypt as a well-known, trusted certificate authority made SSL certificate acquisition easy. In combination with cert-manager, developers can ensure proper transport encryption and integration with pre-existing components such as NGINX Ingress in almost no-time. On top of the scenario demonstrated here, cert-manager can also assist when it comes to more complex scenarios such as
- wildcard SSL certificates, and
- certificates for secure in-cluster communication with mTLS.